Why Have An AC Repair Technician Carry Out Heat Load Testing | Flower Mound, TX
Are you planning to install a heating and air conditioning system at your home? Congratulations, you will manage to kill two birds with one stone. However, there are several things that you should consider before you purchase an air conditioning system, such as size, fuel, and energy efficiency, among others. This ensures you purchase a unit that will effectively cool or heat your home easily and without struggling. A too-small unit will strain to cool your home, while a too-large system will start short cycling. The effect of both is the wearing out of the different parts, resulting in a need for repeated AC repairs.
One of the least known factors to consider when purchasing an air conditioning system, at least for some homeowners, is the heating load. Before purchasing an air conditioner, AC repair technicians recommend you heat load test your home. Additionally, the professional might ask you about your home’s heat load value, especially if you have been experiencing issues with your already installed unit.
Although the idea of heat load testing might initially appear daunting, once you understand what it means and its benefits, the reason for it becomes clear.
What’s Heat Load Testing?
To explain heat load testing in the simplest terms, it is a way of determining or measuring the energy it will take to keep your indoor setting’s temperatures to your preferred comfort levels. The amount of energy used or the value obtained after heat load testing is called a heat load. AC repair technicians recommend that you have the space you want and a heating and air conditioning system installed and tested for heat load value before purchasing the unit. Generally, the heat lead is higher for poorly insulated and larger homes or offices. Conversely, the heat load is lower if an office or home is properly insulated and smaller.
How’s Heat Load Testing Carried Out?
To conduct heat load testing, your heating and AC repair technician will visit your Flower Mound, TX home in person. You cannot do this yourself, meaning you will rely on the technician’s expertise to determine the value. Once the professional arrives at your home, they will look at the space you want heated or cooled, canvassing for particular information. The professionals will note how many windows are in your office or home and their condition ( whether they allow the conditioned air to escape). The AC repair technicians will also note the directions the windows are facing and the level of insulation in the attic and the walls.
The technician will also determine and note the number of people living in your home (the size of your family). The other thing they will consider when determining the heat load is the local climate of your residence. Upon having all the information at hand, the professionals will go ahead and plug the information into several formulas to calculate the heat load of your home. This value will tell them the areas that need improvement and the strength of the HVAC system that you should purchase.
Uses of Heat Load
How is this value used? The value of your home’s heat load tells the AC repair and installation team the size of the furnace or HVAC system you need. On the basis of the value of heat load, the technicians can recommend some models that can appropriately serve your needs. You must have an appropriately sized unit. If you purchase a too-small HVAC system, it will not effectively cool your home.
The system might run continuously, increasing the energy utility bills but not achieving the required heating or cooling. A system that is too large also isn’t a good choice. In terms of heating and air conditioning, larger isn’t necessarily better. If a system is too large, it turns on and off quickly, resulting in short cycling. This results in a lot of wearing out of the different components of the appliance, necessitating frequent AC repairs and replacements because of premature failure.
Ways of Reducing Heat Load
Reducing the heat load is among the most efficient ways of reducing energy use for your Flower Mound, TX home. Fortunately, there are several measures that you can take with the help of your AC repair technicians and others that you can take on alone.
You will save money and energy whenever you lower the heat load’s value. Below are some practical ways that you can adopt to lower the heating load on your HVAC system, heat pump, or furnace.
Changing the Air Filters: if your HVAC system or furnace filter is clogged by debris and dust, it will strain to push the air via the filter. This means that the system will use more energy. It also can stress the various components of your heating system.
Seal the Air Leaks: Normally, you should schedule or plan an energy audit that carefully assesses your home or office for energy use. The audit should pinpoint the areas
where insulation is lacking and the air leaks. Upon determining where the air might be leaking, you should have the technician use weather stripping, caulk, or spray foam to seal the leak.
Improve the insulation: The attic is the best location for additional insulation. Both in the summer and the winter, this will save energy. A properly insulated, vented, and sealed attic will lessen the heat loss from those living spaces below into the attic during the heating season. This makes those spaces more effectively heated by your heat pump or furnace.
Install a Smart or Programmable Thermostat: This smart device will help with heating costs when you aren’t at home in the daytime or even at night when the inhabitants of your home can tolerate cool sleeping temperatures.
Always Test the Heat Load!
For more advice on reducing the heating load in your Flower Mound, TX home, contact us at One Hour Air Conditioning & Heating of Dallas, your reliable AC repair company.