Photo By woaiss at Shutterstock
Your HVAC is an expensive investment. It’s crucial that you know how to properly maintain them and do some troubleshooting repairs to resolve minor problems. For further assistance, please contact a heating and AC repair company in Frisco, TX.
Clean or Replace Your Filter
HVAC filters play a part in your HVAC’s overall efficiency. It’s recommended that they get cleaned or replaced every two to three months. Otherwise, your HVAC system will only work harder and it will consume more energy. If you want to save money and avoid calling a heating and AC company in Frisco, TX for repairs, then ensure that you regularly maintain your filters.
You may also try checking your filters every month. Replace it if it looks dirty. And even if it doesn’t look dirty after three months, it’s best that you change the filters so you don’t strain your HVAC system. When cleaning or replacing HVAC filters, ensure that you follow the manufacturer’s recommendation. If you have further questions, feel free to contact a heating and AC repair company.
If you really want to maximize the benefits you get with your HVAC filters, then consider buying high-efficiency filters for your home. Choose those that can get rid of the tiniest particles. For installation, always work with a licensed heating and AC company in Frisco, TX.
Check the Outdoor Units
It’s crucial to check all the components of your HVAC system to ensure it’s still in good condition. This includes the outdoor unit too such as the heat pumps or the air conditioners. Ensure that there are no branches, grass clippings, leaves and other debris that’s blocking the area. Otherwise, it’s going to affect the efficiency of your HVAC system. If you need help maintaining the outdoor unit, don’t hesitate to contact an HVAC company in Frisco, TX.
Check the Insulation and Refrigerant Lines
You may have a high-efficiency HVAC unit, windows and roof, but if your insulation is bad, heated and cooled air will still escape outside. And your HVAC units will still work harder. To avoid calling a heating and AC repair company for repairs, ensure that you regularly check your home’s insulation especially the attic and the crawl spaces. Call a professional for help if you need to. Also, ensure that you seal all cracks or fix drafts.
In addition, it’s also important to check the refrigerant lines. Replace them when they are damaged or missing. We understand that some homeowners would not know how to go about this — please contact a heating and AC repair company for assistance. Our technicians are licensed and highly experienced with refrigerants or HVACs.
Close Your Home’s Air Registers
Sometimes, you may need to close your home’s air registers to direct the air in some parts of your house. However, do ensure that you don’t close more than 20 percent of your registers that will only strain your HVAC system — you don’t want to end up calling a heating and AC repair company for repairs.
Air Conditioner Maintenance Tips:
Filters – like your HVAC, you need to also clean or replace your AC filters so you wouldn’t strain your unit. You can avoid calling a heating and AC repair company in Frisco, TX, for repair when the filters are regularly replaced.
Condenser drains – Apart from checking the drains in your showers and sinks, you need to also check the drain channels for your condenser. If the problem isn’t addressed, it might lead to discolored walls.
AC coils – Apart from the filters, you need to also check the condenser coils and the evaporator because they collect dirt. They will need to be regularly maintained too. You can avoid calling a heating and AC repair company for costly repairs when you maintain all the components of your AC system
Coil fins – It’s important to check them to ensure they’re not bent or have dents in them. But don’t worry, you can purchase a fin comb to straighten them out. If you need further assistance though, feel free to contact a heating and AC repair company.
You Need Professional Maintenance
Although you need to also check your heating and cooling system periodically for any possible issues, it’s also important to hire a heating and AC repair company in Frisco, TX, for professional maintenance of your system. A technician would check all the components of your system and make sure they’re in excellent shape. Any problem with the unit will also be addressed during the scheduled maintenance.
Reach out to One Hour Air Conditioning & Heating for a regular tune-up. Our team of licensed and experienced technicians can work with all makes and models. We also offer a 100 percent guarantee to give you peace of mind. Rest assured, we always go the extra mile and work incredibly hard to make all our customers happy and delighted.
Tips for HVAC Repairs
When you suspect there might be something wrong with your heating and cooling systems, please never ignore it. As much as possible, contact a heating and AC repair company right away. They can do a thorough inspection of your system.
Before calling a technician, you may also consider checking your system’s components first. You may be able to fix very minor issues. For major repairs, only work with a licensed and insured heating and AC repair company.
Power Switches – When your HVAC system suddenly won’t turn on, don’t call a heating and AC repair company right away, try checking the power switches first to make sure they’re not flipped. Go to your basement or the attic and look for the power switch. Check if there’s nothing wrong with it. Otherwise, call a technician for help.
Thermostat – Another thing you could do before calling a heating and AC repair company is to check the thermostat first. Perhaps you only need to change the batteries of your device. You could save a lot of money when you do these simple repairs first. Try to be proactive when it comes to your heating and cooling system to save more money.
If you have a programmable thermostat, an outage or a power surge could have changed the programmed settings. Inspect your device first to see if there’s something different or unusual about it before calling a heating and AC repair company.
Air filters – Another culprit why you’re heating and cooling system is acting up is a clogged filter. Remember, air filters will need to be cleaned and replaced every two to three months. Failure to do this could result in dirt and debris building up in the air filters. This dirt and debris could circulate in your living spaces and it’s going to be another problem especially for family members suffering from allergies or other respiratory illnesses.
If the thermostat and the power switches won’t solve the problem, the next step is to check the air filters. Make sure they’re clean and there’s no buildup of any dirt or debris. You’ll most likely resolve the issue after cleaning the filters. If not, contact a heating and AC repair technician.
Circuit breakers – When there are power interruptions, your AC may overheat and it will trip the circuit breakers. All you need to do is flip it back to the normal position.
Condenser unit – A condenser unit may be outside but it’s still part of your HVAC system. You need to make sure it’s free of dirt too or debris. You may have issues with the efficiency of your unit when something is blocking the air exits. Fix this first before calling a technician in your area.
You may be able to do some minor troubleshooting steps on your own. But for major repairs, it’s important that you contact a licensed technician so they can thoroughly inspect your unit, diagnose the problem and then provide you with permanent solutions.
If the problem is too complex for you, even if it’s just a minor one, then we suggest that you always call a professional. A reliable and trusted heating and AC repair company have skilled technicians who can provide you with the best and cost-effective solutions. Don’t hesitate to reach out to them if you’re having issues with your heating or cooling system. Avoid hiring inexperienced or unlicensed technicians even if they’re offering their services for a very low price. Remember, fixing HVACs may be risky and dangerous. Handypersons usually don’t have insurance — they won’t be able to get one too as they do not have the license. When they get injured while on the job, you will have to shoulder all medical expenses. You will have peace of mind when you hire an insured heating and AC repair company as their insurance would take care of all the medical expenses. In addition, licensed technicians are also fully equipped and they always have safety precautions before doing repairs or major installations.
Tips for Furnace Repairs
One of the good things about scheduling regular maintenance of your HVAC system is that you will get fewer repairs. If you do encounter a problem, try to do these easy troubleshooting steps first before calling a heating and AC repair company.
Circuit breakers – When the furnace doesn’t turn on or you don’t see anything on the thermostat, check the circuit breakers first to see if you might have blown a fuse. Make sure that you properly label them so you know what you’re looking for. Contact a technician if you need further assistance.
Pilot light – Another culprit could be the pilot light. This occurs when the pilot light is located in a draft area. Try to seal or block the draft first and then close the doors and windows. Simply relight it to see if it’s going to fix the issue. If it doesn’t work, there could be a clogged pilot opening. You will need to call a technician for this.
Furnace switch -Is it set to heat? If not, then that’s the problem. You only need to set it to heat and then you’re good to go. If it doesn’t fix the issue, try to check all the other things we’ve mentioned before calling a technician first. You can save money when you do some minor troubleshooting steps on your own. Just a reminder, if you’re not confident about doing some of these or you think they’re too complex for you, don’t hesitate to contact a technician in the area.
Reset the ignition – If you have an electric furnace, try to reboot it to see if it’s going to fix the problem. Turn off the thermostat and then wait for a few minutes before resetting it. That should fix the issue. If not, call a technician near you.
Gas leaks – This is a major emergency. When you smell gas or if your carbon monoxide detectors send an alarm, you need to turn off your furnace right away, open all the windows and doors for proper ventilation, and then go outside to call a heating and AC repair company. You need a licensed technician to help you fix this emergency.
If you need a reliable and trustworthy heating and AC repair company in Frisco, TX, please don’t hesitate to reach out to us. We are available 24 hours a day, 7 days a week to accommodate all your emergency needs. All our technicians are also licensed, highly trained and skilled to perform any HVAC repairs, installations and maintenance. We have been in the business for decades and we aim to continue to provide unparalleled HVAC services to all homeowners and businesses.
Additionally, our HVAC van is fully equipped. Should something else come up during the service call, our team would make sure to resolve the issue on the same day. There’s no need to schedule another appointment when you hire us, for we are committed to making our customers happy. Rest assured, you’ll be completely delighted with the service we provide.
Contact us anytime and we’ll quickly dispatch a skilled technician to inspect your unit, discuss the problem with you along with the best solutions. Contact us today for an appointment.