Photo By fstop123 at istock
So, you’ve decided that you need to get a new air conditioner, but you’re not really sure what to expect from your air conditioner installation. Well then, you’ve come to the right place because we’re going to help you better understand exactly what it takes to get a new air conditioner and get it set up and installed in your home. Of course, that means you’re going to need the right company to take care of everything too. So, what do you need to know?
Getting a Quote
Before you even get to the air conditioner you’ll want to take a closer look at your costs. After all, you don’t want to get caught up in working with a specific company and not pay attention to where you could get the best deal. Instead, make sure you’re getting a quote on the service from at least a couple different companies. That way, you know if you’re actually getting a good deal and you know what you’re going to get for your money as well. You get that by asking plenty of questions.
You may also want to talk with each of the different companies about different types of air conditioner installation. Find out about some of the higher end options as well as some of the lower end options and something in the middle. That way you’ll be able to choose an air conditioner that works for your needs as well as for your budget. And you’ll still have little more choice when it comes to the specific company that you want to work with. They may have more than one option for which air conditioner installation you want.
Getting the Right Air Conditioner
While you’re at it, you want to make sure you’re getting an air conditioner that will work for your home. Of course you can get something really small and save money on the upfront cost of air conditioner installation in Dallas, TX. But you’re definitely not going to get an efficient or long-lasting system. If it’s too small for your house the air conditioner is going to be working too hard to try to keep up and that means it’s going to burn out way too fast. You’re definitely not going to get your value out of it and you’ll need to get a brand new one again.
On the other hand, if you get something that’s too big for the space you’ll spend more on the air conditioner installation and you could still actually cause damage to the unit because it’s not being used properly. Instead, you want to work with the air conditioner installation company and get something that’s going to work for you and give you the service that you need and nothing more or less. The right company is definitely going to be able to help you with that and can make sure that you’re choosing something that will work for your home.
What to Look at
When you’re choosing the right air conditioner installation you’ll want to look at a number of different factors. Those include the HSPF, the AFUE, the SEER and the EER. But let’s take a little closer look at what each of those are and how they’re going to impact the way that you choose your air conditioner and the way that your air conditioner is going to work for you. After all, you want to make sure you are getting something high quality that’s going to take care of your home.
HSPF – The HSPF or heating season performance factor is all about the efficiency of the heat pump on your system. If it’s at least 8.2 then you’re going to have something with an Energy Star label, which means that it’s going to be efficient enough to be better for the environment, plus it’s going to be more cost efficient for you.
AFUE – The AFUE is the annual fuel utilization efficiency. This is what percentage of energy that’s taken in by the unit is actually put back out as heat and that’s important for your HVAC system. You want to make sure that you’re getting a very energy efficient system and the higher the ratio here the better.
SEER – The SEER or seasonal energy efficiency ratio is about the efficiency of the actual cooling part of the system. This is what’s going to be in the air conditioner rather than the heating side of the HVAC. You want at least a 13 air conditioner rating but you can usually get up to a 21.
EER – The EER or energy efficiency ratio is all about just how energy efficient the unit is. It’s based on how the unit will do if you have an outside temperature of 95, an inside temperature of 80 and a humidity of 50%.
Choosing Your Mix
You want something that’s going to be as energy efficient as possible because it’s going to help you out in the long run in the Dallas, TX area. You’ll have a little higher upfront cost when it comes to the air conditioner installation, but you’re definitely going to save money over the long term and that’s definitely going to be a benefit for you. You want to be able to get the best possible outcome and service without having to spend a lot of money, but there’s a tradeoff.
If you get a more expensive unit that’s more energy efficient you’re going to spend less on actually using it over time. And it’s going to give you a better performance the entire time. So, that air conditioner installation will actually be a better investment for you. Not to mention it’s going to be better for the environment because it uses less energy to do the same or better job. So you’re getting efficiency that’s great for you and your wallet as well as for the planet because you’re using less energy.
On the other hand, if you choose a less expensive unit upfront, that’s less energy efficient, you’re not going to get those same air conditioner installation benefits. You’ll pay a little less upfront, but over time you’re going to have higher bills and expenses associated with the unit. You’ll find that the monthly bills you pay are higher because your unit is not as efficient and it uses a lot more energy than it puts out. This is not so great for you and it’s also not so great for the environment because you’re using a whole lot more energy in order to get the same result.
Preparing for the Job
Once you’re ready to actually have your air conditioner installation carried out you’ll need to hire the right contractors and then be prepared for the entire process. It could be a relatively short process or it might take a while longer. It’s all going to depend on the space you have, the current system, what needs to be done and what you’ve chosen to install. In general, it will take 8 hours or more to get a full air conditioner installation completed, but keep in mind that it could take longer or you could be on the shorter side.
The best thing you can do is get your Dallas, TX home fully prepared. And that involves preparing the area that the air conditioner installation team is going to need to get to. If they need to get into a back room, crawlspace or basement especially you want to make sure there’s a clear path to help them get there. And you want to make sure that you get rid of anything you might have stored close to these areas. The easier it is for them to get in and out the faster the job is going to get done, after all.
This part of the process also includes making sure that the air conditioner installation team can get into the house. It’s not just about getting around once they’re inside, but also getting from your driveway or in front of the house (wherever they need to park) into the home by going across the yard. Make sure there’s a large, clear path to get through these areas as well. This will make it easier to get your new air conditioner or full HVAC system into the house without damage. This will also help improve the speed that the job is done.
Finding a safe place for your pets is another important step. You don’t want them to be injured by accident with so many people coming and going, especially with the equipment and tools that they will need to move through your home. Not to mention there will be doors opening and closing frequently, which could make it all too easy for your pets to slip out. Finding a safe place for them to stay either in the house or elsewhere while the work is being done will help everyone to stay safer and get the job done right.
Getting the Job Done
When it’s time to get the job done you’re not going to have to do much of anything. Once you’ve prepped the space you can sit back and wait for the work to be completed without you. The only thing you may need to do is answer questions as the team is getting the job done. It’s going to be pretty well done without your input however because you’ve already made all the decisions that you need to, including which air conditioner you want and where it’s going to go in your home (though that was likely decided for you by whoever installed the first system).
The team will start their air conditioner installation by removing the system that you already have. If you’re only replacing the air conditioner then they will dismantle this portion of your HVAC system and remove the air conditioner. They will store it safely away until they remove the new one from their vehicle and then will load the old onto their vehicle to take away with them. If you are replacing the entire HVAC system it could take a little longer as they need to take it all out but in pieces.
Any new ductwork or any modifications to the system will be done from there. If your new system will fit together with the old one then you’re in luck because everything will be taken care of more quickly. This step may involve minimal changes or adjustments. On the other hand, if you’re changing a lot about your system you may need to have new ductwork put in or a lot of modifications. This can add to the amount of time it takes to get the entire air conditioner installation completed.
Finally, the new system will be installed. This is going to take at least as long as removing the old system and possibly longer as it has to be done very carefully to avoid damage or mistakes. You want to make sure that your new air conditioner installation is done properly and that involves a long and slightly drawn out process to make sure it’s taken care of. You’ll also want to make sure that you approve of any of the work that’s done at this point to make sure it all looks right. And the team should walk you through using your new system before they leave.
Choosing Your Team
If you’re ready for air conditioner installation for your Dallas, TX home then you’ll want to call One Hour Air Conditioning & Heating of Dallas. You’ll find a team who is ready and waiting to take care of anything that you need. And more than that, we can get it done quickly and right, the first time. You’ll love your new air conditioner, whether you’re getting only air conditioner installation or a full HVAC system replaced in your home. After all, you want to make sure that your home is going to be completely comfortable all year around, right? And that comes from a great quality HVAC.